Skip to main content
Iron Aid tumble dryer does not dry well
Zanussi Support

Iron Aid tumble dryer does not dry well

If the Iron Aid tumble dryer does not dry well, refer to the suggestions below for step by step instructions.

Laundry is always creased:

80% of the creases will be removed. A few creases will always remain.

  • Make sure to put correct volume of laundry (max. 5 shirts) and to choose appropriate settings.
  • Remove the clothes from the tumble dryer as soon as it is finished. Hang them all up on hangers and pull them back into shape.

Check if the appliance works:

  • Fill the steam tank up to maximum level.
  • Putt in one dry, thin cotton shirt and select Update cycle (5 positions to the right of the Off position).
  • Listen to find out whether the drum rotating sounds are audible (if possible, put a clothes-peg in the machine).
  • After the cycle the laundry should be slightly damp and with less creases.
  • Check whether the steam water level in the tank has dropped.
Damp clothes:

It is normal with Iron Aid for the clothes to be slightly damp after a steam cycle.

  • Hang the clothes up for 10 minutes on a hanger and they will dry with almost any creases.

Set dryness measurement:

  • Press "Sensitive" and "Start" at the same time and hold the buttons for 10 seconds.
  • Press "Start" until C0  and the horizontal line appears at the bottom on the display.